Description

SECO-LARM MVD-AH12-01Q 4K HDMI Splitter with 2 HDMI Outputs

The ENFORCER 4K HDMI Splitters allow for one HDMI source to simultaneously transmit to up to four different monitors. The splitters work with most HDMI devices, delivering the very best in digital audio and video signals with HD resolutions of up to 4K@60Hz. An LED indicator clearly displays power status as well as which outputs are active. The 4K HDMI Splitters can be daisy chained up to four levels for even more outputs.
IMPORTANT: This product is designed to extend an HDMI® signal. This product is not to be used to bypass any copy protection or other content protection system. All usage of this product shall conform to the license that comes with the content.

Features:

• Transmits an HDMI source to up to two different HDMI displays
• Additional splitters can be daisy-chained for more outputs
• HDR Support
• Supports up to 4K@60Hz resolution and 3D video
• Individual status LEDs for each HDMI output
• Two EDID management settings
• One 5VDC power supply included

• Specifications:

  Type		4K HDMI® Splitter
  Maximum Single Link Range		4K*2K@60hz
  Deep Color		24bit RBG YCBCR 4:4:4
  Video Formats Supported		HDMI 2.0b, HDCP 2.2
  Audio Formats Supported		LPCM 7.1 CH Dolby TrueHD, DTS-HD Master Audio
  Output Video		HDMI®
  HDR Support		Yes
  Resolutions Supported		4K 1080p 1080i 720p 576p 576i 480p 480i
  Video Amplifier Bandwidth		600MHz 18Gbps
  Video Input Connector		1x HDMI® Type A 19-pin female
  Max. Input Cable Length		24AWG: 50’ (15m); 26AWG: 30’ (10m); 28AWG: 16’ (5m)
  Video Output Connector		2x HDMI® Type A 19-pin female
  Max. Output Cable Length		24AWG: 50’ (15m); 26AWG: 32’ (10m); 28AWG: 16’ (5m)
  Operating Voltage		5VDC
  Power Supply		1A@5VDC (2.1mm plug)
  ESD Protection		±8kV (air-gap discharge), ±4kV (contact discharge)
  Current Draw		2W
  Operating Temperature		32°~104° F (0°~40° C)
  Operating Humidity		20~90% RH (no condensation)
  Dimensions		2-3 16″x3-15 16″x5 8″ (56x100x16 mm)
  Weight		6-oz (165g)

  Troubleshooting:

  HDMI device does not function correctly		Make sure the splitter is powered. Make sure the source and display(s) are powered. Make sure that there are no problems with the HDMI source, HDMI cables, or HDMI display(s) by plugging a source directly into the display using the HDMI cables. Make sure that the source and display(s) are plugged in to the correct connectors. Make sure the HDMI source is compatible with the HDMI display(s). Make sure the HDMI input and output cables are used within the specified range (see Specifications).

  Download:

  • Product Information Sheet

  • Manual

  • Additional information

  Title	Default Title